ZyXEL

Zyxel WAX610D Punto Acc WiFi6 Nebula 4x4 1xMGbE

422,79€ EUR
WAX610D-EU0101F
1
+
-
Only 1 units of this product remain

Marca ZyXEL
Modelo WAX610D-EU0101F
Características Hardware - Ethernet port
  1 x 10/100/1000/2500M LAN
  1 x 10/100/1000M LAN
- Power     
  PoE (802.3)at: power draw 19.5 W
  DC input : 12 VDC 2A
- Antenna type: 4x4 + 2x2 dual-optimized antenna
- Antenna gain     
  2.4GHz: Peak Gain 5dBi
  5GHz: Peak Gain 6dBi
 Minimum Receive sensitivity: Min. Rx sensitivity up to -101 dBm
- Band Steering: Yes
- WDS/Mesh: Yes (V6.10)
- Fast roaming: Pre-authentication, PMK caching and 802.11r/k/v
- DCS (Auto Channel): Yes
- Load balancing: Yes
Características Inalámbricas - Standard: IEEE802.11 ax/ac/n/g/b/a
- MIMO: MU-MIMO
- Wireless speed:
  2.4GHz: 575Mbps
  5GHz: 2400Mbps
- Frequency band:
  2.4 GHz
  USA (FCC): 2.412 to 2.462 GHz
  Europe (ETSI): 2.412 to 2.472 GHz
  5 GHz (IEEE 802.11 a/n/ac)
  USA (FCC): 5.15 to 5.35 GHz; 5.470 to 5.850 GHz
  European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
- Bandwidth: 20-, 40- ,80- and 160-MHz
- Conducted typical transmit output power:
  US (2.4GHz/5GHz): 23/28dBm
  EU (2.4GHz/5GHz): 19/25dBm
- IPv6
- VLANs
- WMM
- U-APSD
- DiffServ marking
Gestión - Operating mode:
  Nebula Cloud managed
  Controller-managed
  Standalone
- ZON Utility:
  Discovery of Zyxel switches, APs and gateways
  Centralized and batch configurations
  IP configuration
  IP renew
  Device factory reset
  Device reboot
  Device locating
  Web GUI access
  Firmware upgrade
  Password configuration
- Zyxel Wireless Optimizer:
  WiFi AP planning
  WiFi coverage detection
  Wireless health management
- Web UI/CLI: Yes
- SNMP: Yes
Otras Características Físicas
- Dimensiones (An. x Pr. x Al.) (mm/pulg.): 180 x 180 x 39/7.09 x 7.09 x 1.54
- Peso (g/lb.): 545/1.20
- MTBF (h): 329,004
Seguridad
- Encryption     
  WEP
  WPA
  WPA2-PSK/WPA3
- Authentication     
  WPA
  WPA2
  WPA3-Enterprise
  EAP
  IEEE 802.1X
  RADIUS authentication
- Access management     
  L2-isolation
  MAC filtering
  Rogue AP detection
Entorno
- Temperatura de funcionamiento
  0°C a 50°C / 32°F a 122°F
- Humedad de funcionamiento
  10% a 95% (sin condensación)
- Temperatura de almacenamiento
   -30°C to 70°C/-22°F to 158°F
- Humedad de almacenamiento
  10% a 90% (sin condensación)
Certificaciones
- Radio     
  FCC Part 15C
  FCC Part 15E
  ETSI EN 300 328
  EN 301 893
  LP0002
- EMC     
  FCC Part 15B
  EN 301 489-1
  EN 301 489-17
  EN55022
  EN55024
  EN61000-3-2/-3
  EN60601-1-2
  BSMI CNS13438
- Safety     
  Safety EN 60950-1
  IEC 60950-1
  BSMI CNS14336-1
Contiene
- Placa de montaje
- Tornillos de montaje
Fecha de revisión 14-11-2022 por MPM

You might also be interested in